RANGE
COMPOSITION
N 900: a range of over 150 models for the
professional caterer designed to guarantee
the highest level of performance, reliability,
energy saving, safety standards and
ergonomic operation. These concepts are
reflected in the total modularity of the range
that ensures innumerable configurations,
either free-standing, bridged or cantilever.
N900 demonstrates how advanced
technology can satisfy the needs of the
professional caterer. The models detailed in
this sheet are two fry tops in gas and electric
version on static oven.
Model 200224
N 900
ZANUSSI
FULL MOD. FRY TOPS ON OVEN-THERMOSTATIC
P R O F E S S I O N A L
� Cooking surface with rounded corners and
removable higher splashback, available in
mild steel (smooth or ribbed surface) or mild
steel coated with a layer of hard polished
chrome (only smooth) for optimum grilling
results.
� The special design of the control knob
system guarantees against water infiltration.
� Removable splashback in stainless steel
and scrapers with smooth/ribbed blades
included as standard.
FUNCTIONAL AND
CONSTRUCTION
FEATURES
� IPX5 water protection.
� On the cooking surface there is a large
drain hole to drain fat into a 3-lt collector
placed under the cooking area.
� Main connections can be via the base of
the unit.
� All models provided with service duct to
facilitate installation.
� All gas appliances are supplied for use
with natural gas, with LPG conversion jets
supplied as standard.
� Very quick heat-up time to maximum
temperature.
� Stainless steel burner with a
* In accordance with H regulations for gas models
belonging to Class B11 (power over 14 kW), it is
necessary to install a chimney (if installed under a
hood) or chimney and draft diverter if the waste gases
are vented directly outside.
self-stabilizing flame. The burner has 4
branches with 8 flame lines (gas models).
� Incoloy heating elements positioned under
the cooking plate (electric models)
� Gas static oven (on model NRFG800) with
stainless steel burners, self-stabilizing flame
positioned beneath the base plate and a
thermostat adjustable from 120° to 280°C
� Electric static oven (on model NRFE800)
with separate thermostats for top and bottom
elements. Oven thermostat with temperature
markings in °C adjustable from 120° to
280°C and power of 6 KW.
� Safety thermostat on models with
thermostatic control (temperature markings in
°C). Piezo iginition.
� Deep drawn worktop in 20/10 stainless
steel. Front and side panels in stainless steel
with Scotch Brite finish.
TECHNICAL DATA
CHARACTERISTICS
MODELS
NRG8SMMO
200224
NRE8SMMO
200225
Power supply
External dimensions - mm
width
depth
height
height adjustment
Sloped cooking surface
Thermostatic valve
Net weight - kg.
Supply voltage
Gas
Electric
800
900
850
50
800
900
850
50
� All models have right-angled side edges to
allow flush fitting joins between units
eliminating gaps and possible dirt traps. The
new built-in design (not valid for gas cock
models) avoids fat infiltration behind the
appliance improving hygienic condition.
l
l
l
171
l
171
400 V, 3N, 50/60
INCLUDED ACCESSORIES
2/1 GN CHROME GRID
SCRAPER FOR RIBBED PLATE FRY TOP
SCRAPER FOR SMOOTH PLATE FRY TOP
1
1
1
1
1
1
200224
200225
LEGEND
NRG8SMMO
200224
NRE8SMMO
200225
EI - Electrical connection
G - Gas connection
400 V, 3N, 50/60
1/2"
OPTIONAL ACCESSORIES
ACCESSORIES
MODELS
NRG8SMMO
200224
NRE8SMMO
200225
2 PANELS FOR SERVICE DUCT (BACK TO BACK)
2 PANELS FOR SERVICE DUCT (SINGLE INST.)
2 SIDE COVERING PANELS FOR TOP-D=900MM
2 SIDE COVERING PANELS H=700 D=900
2 SIDE KICKING STRIPS
2 SIDE KICKING STRIPS F.CONCRETE INSTAL.
2/1 GN CHROME GRID
4 FEET FOR CONCRETE INSTALLATION
4 WHEELS (2 WITH BRAKE)
206202
206181
206278
206134
206180
206157
164250
206210
206188
206126
206132
206136
206156
206155
206150
206151
206152
206146
206147
206148
206191
206192
206166
206167
206177
206178
206179
206174
206175
206176
206086
206185
206186
206133
206234
927225
206160
206202
206181
206278
206134
206180
206157
164250
206210
206188
206126
206132
206136
206156
206155
206150
206151
206152
206146
206147
206148
206191
206192
206166
206167
206177
206178
206179
206174
206175
206176
206086
206185
206186
206133
206234
DRAUGHT DIVERTER WITH 120 MM DIAMETER
DRAUGHT DIVERTER WITH 150 MM DIAMETER
FLANGED FEET KIT
FLUE CONDENSER FOR 1 MODULE DIAM.150MM
FLUE CONDENSER FOR 1/2 MOD. DIAM.120MM
FRONT.KICK.STRIP F.CONCRETE INST.1000 MM
FRONT.KICK.STRIP F.CONCRETE INST.1200 MM
FRONT.KICK.STRIP F.CONCRETE INST.1600 MM
FRONT.KICK.STRIP F.CONCRETE INST.200 MM
FRONT.KICK.STRIP F.CONCRETE INST.400 MM
FRONT.KICK.STRIP F.CONCRETE INST.800 MM
FRONTAL HANDRAIL 1200 MM
FRONTAL HANDRAIL 1600 MM
FRONTAL HANDRAIL 400 MM
FRONTAL HANDRAIL 800 MM
FRONTAL KICKING STRIP 1000 MM
FRONTAL KICKING STRIP 1200 MM
FRONTAL KICKING STRIP 1600 MM
FRONTAL KICKING STRIP 200 MM
FRONTAL KICKING STRIP 400 MM
FRONTAL KICKING STRIP 800 MM
JUNCTION SEALING KIT
LARGE HANDRAIL(PORTIONING SHELF)400 MM
LARGE HANDRAIL(PORTIONING SHELF)800 MM
MATCHING RING FOR FLUE CONDENSER 150DIAM
PAIR OF COVERING STRIPS FOR END ELEMENTS
PRESSURE REGULATOR FOR GAS UNITS
REAR FLUE UPSTAND FOR LARGE CHIMNEY
REAR FLUE UPSTAND FOR SMALL CHIMNEY
SCRAPER FOR SMOOTH PLATE FRY TOP
SIDE HANDRAIL-RIGHT/LEFT HAND
SUPPORT FOR "BRIDGE" SYSTEM 1000 MM
SUPPORT FOR "BRIDGE" SYSTEM 1200 MM
SUPPORT FOR "BRIDGE" SYSTEM 1400 MM
SUPPORT FOR "BRIDGE" SYSTEM 1600 MM
SUPPORT FOR "BRIDGE" SYSTEM 400 MM
SUPPORT FOR "BRIDGE" SYSTEM 800 MM
WATER COLUMN EXTENSION FOR 900 LINE
WATER COLUMN WITH SWIVEL ARM
WATER DRAIN FOR FRY TOP FULL MODULE
WATER DRAIN FOR FRY TOP HALF MODULE
206159
164255
206165
206138
206139
206140
206141
206154
206137
206290
206288
216153
206153
164255
206165
206138
206139
206140
206141
206154
206137
206290
206288
216153
206153
ZANUSSI
P R O F E S S I O N A L
BACK1
2009-09-29
The Company reserves the right to alter technical specifications without prior notice.
|