ZALMAN Fan CNPS7000A User Manual

User s Manual  
(English Edition)  
Intel Pentium 4  
Socket 478 CPU  
AMD Athlon / Duron / Athlon XP  
Socket 462 CPU  
AMD Athlon 64  
Socket 754 CPU  
CNPS7000A  
* Please read before installation  
 
3. Exploded View  
Fan  
Bolt  
Clip  
Fan Bracket  
Heatsink  
Screw for Fan  
Screw for  
Fan Support  
4. Patents  
Korean Patent Application No. 00-54635  
Korean Design Application Nos. 02-17470, 02-25208, 02-25209, etc.  
Patent Applications pending in over 20 nations around the world, including USA, EU,  
and Japan  
5. Cautions During Installation  
1) If excessive force is exerted on the fan, it may malfunction and result in damage to the  
product and/or the computer.  
2) Do not put your finger into the fan while it is running.  
3) Keep the product away from children.  
4) Zalman Tech. Co., Ltd. is not responsible for any problems arising from using the product  
outside its intended purpose.  
5) The exposed core of a Socket 462 CPU can be cracked if proper care is not taken. Read the  
“Installation” section thoroughly before installing.  
6) Zalman Tech. Co., Ltd. is not responsible for any problems arising from using CNPS7000A  
on a Socket 462 CPU.  
 
* The specifications of any product may change without prior notice to improve the performance thereof.  
2
5. Components  
1) Common Components  
FHS Assembly (CNPS7000A-CU/ALCU)  
Four Bolts - For fastening the Clip  
Thermal Grease  
Adjustable Fan Speed Controller (FAN MATE 1)  
User’s Manual  
2) Components for Intel Pentium 4(Socket 478)  
Two (2) Clip Supports - For Socket 478  
3) Components for AMD Athlon / Athlon XP(Socket 462)  
One(1) A - Type(blue) Clip Supports for AMD Socket 462  
One(1) B - Type(white) Clip Supports for AMD Socket 462  
Four Bolts - For Fastening the Clip Supports  
One Set of Washers  
4) Components for AMD Athlon 64(Socket 754)  
Two Nipples  
One Blackplate  
Use Big Hole Washer at Component  
6. Compatible CPU Types  
1) INTEL Pentium 4 - Socket 478  
All current speeds of Pentium 4 Socket 478 CPUs  
For CPUs with higher clock speeds than 3.2GHz, please refer to our website  
(www.zalmanusa.com).  
 
* The specifications of any product may change without prior notice to improve the performance thereof.  
3
Caution)  
As shown in Figure 2 a motherboard that is not compliant with the “10.2mm motherboard  
component height restriction” standard, introduced by Intel, may create interference between  
components and the clip. Please do not install the CNPS7000A when this interference is observed.  
No components higher than 3.9cm should be present within 5.5cm radius from the center  
of the CPU to install this product.  
10.2mm Motherboard component height restriction  
Clip  
Mainboard  
component  
Top View  
Top View  
Clip  
Mainboard  
component  
Side View  
Side View  
Figure 1 (O)  
Figure 2 (X)  
2) AMD Athlon/Duron/Athlon XP - Socket 462  
All CPUs conforming to Socket 462 platform  
Caution)  
This product requires "Heatsink Attach Holes" around CPU  
Socket as shown on the right figure.  
No components higher than 3.9cm should be present within  
5.5cm radius from the center of the CPU to install this product.  
This product can not be installed if any Motherboard  
component(capacitor) taller than 1.5cm is located  
under the clip.  
4-4bl  
For more information, refer to “Compatible Motherboard List”  
at our website(www.zalmanusa.com).  
3) AMD Athlon 64 - Socket 754  
is officially released.  
 
* The specifications of any product may change without prior notice to improve the performance thereof.  
4
(INTEL Pentium 4-478)  
7. Installation  
CPU (IHS)  
1) Apply Thermal Grease  
Spread thermal grease thinly and evenly  
over the CPU core.  
Thermal Grease  
Clip Support  
Retention Guide  
2) Install Clip Support  
Install the two clip supports at both sides  
of the retention guide as shown on the  
right.  
Bolt  
3) Insert Bolts  
Insert the bolts into the inner holes on the clip.  
Outer Hole  
Inter Hole  
Clip  
4) Fasten Bolts  
Place the FHS on the center of the CPU.  
Screw in both bolts in an alternating  
fashion until they are completely tightened.  
5) Supply Power  
3-Pin Fan  
Connect FAN MATE 1 between the  
motherboard and the fan.  
Connector  
FAN MATE 1  
Speed Control Knob  
(Mainboard)  
Mainboard  
3-Pin Fan Connector  
(CNPS7000A)  
 
* The specifications of any product may change without prior notice to improve the performance thereof.  
5
(Athlon/Duron/Athlon XP-462)  
8. Installation-AMD  
B-Type Clip Support (White)  
A-Type Clip Support (Blue)  
1) Install Clip Support  
Small  
Washer  
Install the socket 462 Clip Supports  
as shown on the right.  
Lever  
Ensure to install A-Type clip  
support(Blue) by the Lever.  
M/B  
Small  
Washer  
Bolt  
B-Type Clip Support (White)  
CPU  
2) Apply Thermal Grease  
Spread thermal grease thinly and evenly  
over the CPU core.  
Thermal Grease  
Bolt  
3) Insert Bolts  
Insert the bolts into the inner holes on the clip.  
Outer Hole  
Inter Hole  
Clip  
4) Fasten Bolts  
Place the FHS on the center of the CPU.  
Screw in both bolts in an alternating  
fashion until they are completely tightened.  
5) Supply Power  
3-Pin Fan  
Connect FAN MATE 1 between the  
motherboard and the fan.  
Connector  
FAN MATE 1  
Speed Control Knob  
(Mainboard)  
Mainboard  
3-Pin Fan Connector  
(CNPS7000A)  
 
* The specifications of any product may change without prior notice to improve the performance thereof.  
6
(Athlon 64-754)  
9. Installation-AMD  
1) Fasten Nipples  
Nipple  
M/B  
Locate the backplate on the bottom of the  
mohterboard under the CPU socket, then  
fasten the nipples as shown on the right.  
Big Hole  
Washer  
When installing CNPS7000A on Athlon  
64,Retention Frame is not needed.  
Backplate  
CPU (IHS)  
2) Apply Thermal Grease  
Spread thermal grease thinly and evenly  
over the CPU core.  
Thermal Grease  
Bolt  
3) Insert Bolts  
Insert the bolts into the outer holes on the clip.  
Outer Hole  
Inter Hole  
Clip  
4) Fasten Bolts  
Place the FHS on the center of the CPU.  
Screw in both bolts in an alternating  
fashion until they are completely tightened.  
5) Supply Power  
3-Pin Fan  
Connector  
(Mainboard)  
Connect FAN MATE 1 between the  
motherboard and the fan.  
FAN MATE 1  
Speed Control Knob  
Mainboard  
3-Pin Fan Connector  
(CNPS7000A)  
 
* The specifications of any product may change without prior notice to improve the performance thereof.  
7
10. Notes on Usage  
1) Checking CPU Compatibility & Using FAN MATE 1  
Read “Compatible CPU Types” on page 4 to confirm that your CPU is compatible before using  
the CPU cooler. The speed control knob on FAN MATE 1 can be turned to set the fan speed.  
When it is turned counter-clockwise, the fan operates in Silent Mode at its minimum speed.  
NOTE) FAN MATE 1 has been specifically designed to be used with the fan included in this  
product. Zalman Tech. Co., Ltd. is not responsible for any damage caused to systems  
or CPUs by using FAN MATE 1 with other types of fans.  
2) Cautions During Booting  
When booting the computer, it may automatically power down after an alarm sound by a system  
monitoring program to indicate that the the CPU fan is rotating slowly. If this happens, turn the  
speed control knob fully clockwise to increase the fan speed. Then set ‘CPU Fan Detected’ to  
‘Disabled’ in the BIOS settings, or set the slowest rotational speed of the CPU fan in the system  
monitoring program to less than or equal to 1300 RPM. Now the fan can be set back to the silent  
mode by turning the knob counter clockwise.  
NOTE) Some motherboards do not boot if the rotational speed of the CPU fan below a certain  
number of RPM. If the BIOS settings are updated, Silent Mode can be used. For more  
information on updating your BIOS, please refer to your motherboard manufacturer's  
web site. Disabling of CPU fan speed detection in BIOS settings does not effect  
computer performance.  
3) Creating a Complete Noiseless System  
Use the following Zalman products to achieve stable and silent operation of your computer :  
Noiseless Power Supply, CNPS series CPU Cooler, Fanless Coolers for Northbridge Chipset &  
Video Card, and Noiseless Fan.  
11. Thermal Resistance and Noise  
 
* The specifications of any product may change without prior notice to improve the performance thereof.  
8

Whistler Radar Detector XTR 500 User Manual
Williams Sound Hearing Aid TGS 100 User Manual
Winegard Satellite Radio SD User Manual
Wolf Appliance Company Cooktop SRT484CG User Manual
Xerox Computer Monitor XA3 Series User Manual
Yamaha DVD Player DVD CHANGER User Manual
Zanussi Freezer ZV 45 User Manual
Zanussi Fryer 178048 User Manual
Zanussi Microwave Oven MM900 User Manual
Zenith DVD VCR Combo XBS341 User Manual