Yamaha CD Player CDX 9 User Manual

G B R  
CDX-9  
Natural Sound Compact Disc Player  
Lecteur de disque audionumérique de la série “Natural Sound”  
Natural Sound CD-Spieler  
Natural Sound Compact Disc-spelare  
Lettore di compact disc a suono naturale  
Tocadiscos de Discos Compactos de Sonido Natural  
Natural Sound CD-speler  
OWNER’S MANUAL  
MODE D’EMPLOI  
BEDIENUNGSANLEITUNG  
BRUKSANVISNING  
MANUALE DI ISTRUZIONI  
MANUAL DE INSTRUCCIONES  
GEBRUIKSAANWIJZING  
 
Thank you for selecting this YAMAHA compact disc player.  
FEATURES  
CONTENTS  
Caution ......................................................................... 3  
Connections .................................................................. 4  
Identification of Components ........................................ 5  
Basic Operation ............................................................ 7  
Random-sequence Play ............................................. 11  
Repeat Play ................................................................ 11  
Program Play .............................................................. 12  
Index Search ............................................................... 13  
Track Programming for Recording to Tape ................. 14  
CD Synchronized Recording ...................................... 18  
Notes about the Remote Control Transmitter ............. 19  
Notes about Handling Compact Discs ........................ 19  
Troubleshooting .......................................................... 20  
Specifications .............................................................. 20  
Random Access Programmable Play  
Random-Sequence Play  
Single Track/Entire Disc Repeat Play  
Automatic Spacing Capability  
Automatic Programming for Recording to Tape  
Automatic Peak Level Searching Capability  
CD Synchronized Recording with a Compatible  
YAMAHA Tape Deck  
Display Brightness Changing Capability  
Remote Control Capability  
Optical Digital Output  
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.  
1. This unit is a sophisticated compact disc player. To ensure proper  
operation for the best possible performance, please read this  
manual carefully.  
WARNING  
To reduce the risk of fire or electric shock, do not expose this appliance  
to rain or moisture.  
2. Choose the installation location of your unit carefully. Avoid  
placing it in direct sunlight or close to a source of heat. Also avoid  
locations subject to vibration and excessive dust, heat, cold or  
moisture. Keep it away from sources of hum such as transformers  
or motors.  
To avoid electrical shock, do not open the cabinet. Refer servicing to  
qualified personnel only.  
DANGER  
3. Do not place another component on top of this unit, because to do  
Invisible laser radiation when open and interlock failed or defeated.  
Avoid direct exposure to beam.  
so will discolor or damage the surface of the unit.  
4. Do not open the cabinet of this unit, because to do so might result  
in damage to the unit, or injury by electric shock. If any foreign  
object or substance enters the unit, contact your dealer for  
assistance.  
CAUTION  
Use of controls or adjustments or performance of procedures other  
than those specified herein may result in hazardous radiation  
exposure.  
5. To prevent damage by lightning, disconnect the power cord from  
the household AC outlet during an electrical storm.  
This compact disc player is classified  
as a CLASS 1 LASER product.  
The CLASS 1 LASER PRODUCT  
label is located on the rear exterior.  
(Europe and U.K. models only)  
6. When disconnecting the power cord from the household AC outlet,  
grasp the plug; do not pull the cord.  
CLASS 1 LASER PRODUCT  
7. Do not apply excessive force when using switches and controls.  
8. When moving the unit, be sure to first disconnect the power cord  
from the household AC outlet, and disconnect cords connected to  
other equipment.  
Laser component in this product is capable of emitting radiation  
exceeding the limit for Class 1.  
9. Do not attempt to clean the unit with chemical solvent as this  
might damage the finish. Use a clean, dry cloth.  
10. Be sure to read the “TROUBLESHOOTING” section for advice on  
CAUTION (FOR CANADA MODEL)  
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF  
PLUG TO WIDE SLOT AND FULLY INSERT.  
common operating errors before concluding that your unit is faulty.  
11. Keep this manual in a safe place for future reference.  
FOR CANADIAN CUSTOMER  
12. Voltage selector (General model only)  
THIS CLASS B DIGITAL APPARATUS MEETS ALL  
REQUIREMENTS OF THE CANADIAN INTERFERENCE-CAUSING  
EQUIPMENT REGULATIONS.  
The voltage selector (on the rear panel of this unit) must be  
correctly set to the voltage used locally before making any  
connection to the AC power supply.  
IMPORTANT  
Please record the serial number of this unit in the space below.  
This unit is not disconnected from the AC power source as  
long as it is connected to the wall outlet, even if this unit  
itself is turned off. (standby mode)  
Serial No.:  
The serial number is located on the rear of the unit.  
Retain this Owner’s Manual in a safe place for future reference.  
3
 
CONNECTIONS  
Never plug in this unit and other components until all connections are completed.  
Connections should be made to the correct input terminals of  
the amplifier or other component.  
If the placement of this unit causes noise to other equipment,  
such as a tuner, separate them from each other.  
U.S.A. model  
1
LINE OUT  
DIGITAL OUT  
OPTICAL  
1
Connection cord  
(included)  
To AC outlet  
Amplifier or receiver  
1
CD  
U.S.A. model  
2
LINE OUT  
DIGITAL OUT  
OPTICAL  
1
Optical fiber cable  
(not included)  
To AC outlet  
OPTICAL  
Amplifier with an optical  
terminal  
DIGITAL IN  
Choose one of the ways listed below to connect this unit to your amplifier.  
When the LINE OUT (analog) terminals of this  
When the DIGITAL OUT (OPTICAL) terminal of  
unit are used ( 1 )  
this unit is used ( 2 )  
Be sure that the left (“L”) and right (“R”) LINE OUT terminals  
Before using this terminal, remove the terminal’s cover by  
are connected to the corresponding (left and right) terminals  
of the amplifier or other component.  
pulling it.  
Make the connection from this terminal to the optical input  
terminal of an amplifier by using a commercially available  
optical fiber cable.  
Connect the “LINE OUT” terminals to the “CD” (or “AUX”)  
terminals of the amplifier. If the amplifier does not have such  
terminals, use the “TAPE PB” terminals. For additional  
details concerning these connections, refer to the operation  
instructions for the amplifier being used.  
* Use an optical fiber cable that conforms to EIAJ  
standards. Other cables might not function correctly.  
Be sure to attach the terminal’s cover when this terminal is  
not being used, in order to protect the terminal from dust.  
The LINE OUT terminals of this unit are numbered 1. When  
connecting this unit with a YAMAHA amplifier or receiver  
whose terminals on the rear panel are numbered as 1, 2,  
3, etc., connect the LINE OUT terminals of this unit to the  
input terminals numbered 1 on the rear of the amplifier or  
receiver.  
This terminal can also be connected to the optical input  
terminal of a digital audio tape deck (DAT), MD recorder, etc.  
to record CD onto tape or MD directly.  
4
 
IDENTIFICATION OF COMPONENTS  
* ( ) indicates the page number on which the control part is best described.  
FRONT PANEL  
* The SKIP/SEARCH buttons on the main unit have both the  
functions of the SKIP button and the SEARCH button on the  
remote control transmitter.  
* The PLAY/PAUSE button on the main unit has both the  
functions of the PLAY button and the PAUSE button on the  
remote control transmitter.  
Disc tray (p. 7)  
Display panel  
NATURAL SOUND COMPACT DISC PLAYER CDX-9  
PLAY/  
STANDBY/ON  
PAUSE  
STOP  
OPEN/CLOSE button (p. 7)  
SKIP/SEARCH buttons (p. 8, 9)  
STOP button (p. 8)  
PLAY/PAUSE button (p. 7, 8)  
Remote control sensor (p. 19)  
STANDBY/ON switch (p. 7)  
5
 
* ( ) indicates the page number on which the control part is best described.  
REMOTE CONTROL TRANSMITTER  
DIMMER button (p. 10)  
TIME button (p. 10)  
TAPE button (p. 14)  
SYNCHRO button (p. 18)  
PEAK button (p. 17)  
OPEN/CLOSE button (p. 7)  
CLEAR button (p. 13)  
OPEN/  
CLOSE  
SYNCHRO  
DIMMER  
TAPE  
TIME  
SPACE  
PEAK  
CLEAR  
PROG  
SPACE button (p. 9)  
PROG button (p. 12)  
INDEX button (p. 13)  
1
2
5
8
3
6
9
INDEX  
4
7
+I0  
0
Numeric buttons (p. 8)  
REPEAT  
RANDOM  
REPEAT button (p. 11)  
STOP button (p. 8)  
RANDOM button (p. 11)  
SEARCH button (p. 9)  
SEARCH  
SKIP  
SKIP button (p. 8)  
PLAY button (p. 7)  
STOP  
PAUSE  
PLAY  
PAUSE button (p. 8)  
6
 
This manual describes how to operate this unit by using the remote control transmitter.  
To operate this unit on the front panel, use the corresponding buttons on the front panel.  
BASIC OPERATION  
OPEN/  
CLOSE  
SYNCHRO  
DIMMER  
TAPE  
TIME  
2, 3  
4
SPACE  
1
PEAK  
CLEAR  
PROG  
2
5
8
3
6
9
INDEX  
4
+I0  
0
7
STANDBY/ON  
REPEAT  
RANDOM  
SEARCH  
1
SKIP  
STOP  
PAUSE  
PLAY  
1
2
Turn the power on.  
3
Close the disc tray.  
STANDBY/ON  
OPEN/  
CLOSE  
Load a disc.  
Label side  
upward  
4
PLAY  
OPEN/  
CLOSE  
Disc tray  
Play will begin from the first track of the disc.  
Display information at disc play  
Notes  
After closing the disc tray by pressing the OPEN/CLOSE  
button, the display shows the total number of tracks and the  
total recorded time of the disc for a few seconds.  
1
2
TOTAL  
Additionally, you can close the disc tray by pressing the  
PLAY (PLAY/PAUSE) button, a numeric button or the  
RANDOM button, or by pressing the front edge of the disc  
tray gently. If the tray is closed in these ways, play will begin  
automatically, however, the display will not show the total  
number of tracks and the total recorded time of the disc.  
1
2
Shows the track number selected or being played.  
Shows the time displays. (Refer to “Selecting time  
displays” on page 10.)  
When you finish using this unit  
Standby mode  
Press the STANDBY/ON switch again to turn this unit into the  
In this state, this unit is not disconnected from the source  
as long as it is connected to the wall outlet, even if this unit  
itself is turned off.  
standby mode.  
7
 
To stop play temporarily  
To stop play completely  
PAUSE  
STOP  
To resume play, press the PAUSE button again (or press the  
PLAY button).  
* The PLAY/PAUSE button on the front panel can also be  
used to stop play temporarily or to resume play.  
To play a desired track on the disc  
DIRECT PLAY  
Select a desired track using the numeric button.  
SKIP PLAY  
To play from the beginning of the track following the one now  
playing  
5
SKIP  
To play from the beginning of the track now playing  
SKIP  
The selected track  
number is displayed  
Example: To select track 25  
Press 1 twice, then immediately press 2 once.  
To play from the beginning of the track before the one now  
playing  
SKIP  
+I0  
5
(twice)  
These operations can also be performed when the unit is in  
the pause or stop mode.  
*
If a track number higher than the highest track number on  
the disc is selected, the last track on the disc will be  
played.  
When using the SKIP button on the remote control  
transmitter:  
If the button is pressed and held, the track number is  
continuously changed to higher numbers (or lower  
numbers).  
When using the SKIP/SEARCH buttons on the front panel:  
Be careful not to press and hold a button, otherwise the  
selected track is played forward (or backward) rapidly.  
Caution  
When the disc tray is open, do not touch the inside gear  
wheel. If you touch the gear wheel, your finger may be  
caught in the closing tray and injured.  
NATURAL SOUND COMPACT DISC PLAYER  
STAND
Gear wheel  
8
 
To advance or reverse play rapidly (MANUAL SEARCH)  
To advance rapidly  
The sound can be heard (although slightly garbled) during  
manual search in either direction. This is convenient for  
locating a precise position within a track, or for reviewing the  
contents quickly.  
Manual search can also be performed while disc play is  
paused, though no sound will be heard.  
When using the SKIP/SEARCH buttons on the front panel:  
Be careful not to release a button just after it is pressed,  
otherwise the play is skipped to the beginning of the next  
track or returned to the beginning of the current track.  
SEARCH  
(Press and hold.)  
To reverse rapidly  
SEARCH  
(Press and hold.)  
Automatic spacing  
If you record a disc onto tape with an insufficient time space  
between tracks, the tape deck will not be able to perform blank  
search operations on the tape correctly. Such a search mistake  
of the deck can be prevented by pressing the auto-SPACE  
button to insert spaces of about 4 seconds between the tracks  
before recording.  
Note  
When the automatic spacing function is in effect, the display of  
the total time and of the total remaining time will include each  
of the 4 second non-recorded intervals placed between tracks.  
To cancel the automatic spacing function  
SPACE  
SPACE  
“SPACE” goes off  
from the display.  
SPACE  
9
 
Selecting time displays  
You can select any of the four time displays by pressing the TIME display mode-select button.  
Elapsed time of the track now playing  
Total remaining time on the disc  
TOTAL  
REMAIN  
TIME  
Remaining time of the track now playing  
Total disc play time  
TOTAL  
REMAIN  
Note  
The remaining time  
is 25 or higher.  
will not be displayed if the track number  
Changing brightness of the display  
Normal illumination  
Slightly dim  
If desired, you can change brightness of the display  
in three degrees by pressing the DIMMER button.  
DIMMER  
Dim  
10  
 
RANDOM-SEQUENCE PLAY  
You can have the unit play the tracks on a disc in a random sequence selected by the unit’s microcomputer.  
Notes  
To perform random-sequence play  
This feature will not function during programming, or during  
programmed play.  
If the SKIP  
button is pressed during random-sequence  
RANDOM  
play, the next randomly programmed track will be played. If  
the SKIP button is pressed, play will return to the  
beginning of the track now being played.  
This indication appears while the unit is mixing  
up tracks.  
Total remaining time on the disc will not be displayed during  
random-sequence play.  
To cancel random-sequence play  
STOP  
RANDOM  
or  
REPEAT PLAY  
You can play any desired track or the entire disc repeatedly by pressing the REPEAT button. The repeat play mode will change  
whenever you press the REPEAT button.  
SINGLE REPEAT  
A single track is repeatedly played.  
* This is also available in the programmed-play mode and the  
random-sequence play mode.  
(OFF)  
(If the repeat play mode is switched off, the programmed-  
play mode or the random-sequence play mode will be  
resumed.  
REPEAT  
SINGLE  
REPEAT  
FULL REPEAT  
All tracks (the entire disc) are played repeatedly.  
* In the programmed-play mode, all programmed tracks are  
repeatedly played.  
* In the random-sequence play mode, all randomly sequenced  
tracks are repeatedly played in the same order.  
FULL  
REPEAT  
11  
 
PROGRAM PLAY  
You can enjoy listening to your favorite tracks in any desired order by programming tracks. As many as 25 tracks can be  
programmed in sequence.  
OPEN/  
SYNCHRO  
DIMMER  
TAPE  
TIME  
CLOSE  
PROG  
SPACE  
1
PEAK  
CLEAR  
2
5
8
3
6
9
INDEX  
2
4
4
7
+I0  
0
3
1
REPEAT  
RANDOM  
SEARCH  
SKIP  
STOP  
PAUSE  
PLAY  
1
2
Stop the unit.  
3
Program a desired track by pressing the corresponding  
numeric button.  
STOP  
6
* Repeat this operation to program more tracks. You can  
select the same track again.  
PLAY  
PROG  
4
PROGRAM  
TOTAL  
Flashes.  
Notes  
Display information during programming  
In step 2, if “P-01” does not appear in the display, press the  
TIME display mode-select button.  
If, during programming, the TIME display mode-select button  
is pressed, the program number display can be changed to  
display the total time of the programmed tracks. To return to  
the previous display, press the TIME display mode-select  
button once again.  
PROGRAM  
TOTAL  
The SKIP (  
and  
playing, but only within the range of the programmed tracks.  
The SEARCH ( and ) button can be used during  
) button can be used during  
1
playing to search all tracks, including unprogrammed tracks.  
The PAUSE mode can also be programmed (one time only),  
if so desired, by pressing the TAPE button instead of a  
2
3
numeric button. (In this case, “  
display.)  
B” is illuminated on the  
PROGRAM  
TOTAL  
If, for a compact disc with 25 tracks or more, track number  
25 or higher is programmed, the total time will disappear  
from the display.  
1
Shows the program number for the track to be  
programmed next.  
2
3
Shows the selected track number.  
Shows the total time of the tracks currently programmed.  
* If the total time becomes 100 minutes or more, the highest  
position of a figure will not be displayed.  
12  
 
To stop program play  
To check program data  
Press the STOP button. The first programmed track number  
will be displayed.  
To resume play, press the PLAY button. Play will begin from  
the beginning of the program.  
1. If during program play, press the STOP button.  
2. Press the PROG button.  
3. Each time the SKIP  
button is pressed, the track  
numbers and sequential order of the programmed tracks  
can be checked one after another. The display of the track  
number can be returned (sequentially in reverse order) by  
To cancel a program sequence  
pressing the SKIP  
button.  
There are several methods, as described below.  
Press the STOP button or the CLEAR button while the unit is  
stopped.  
To correct program data  
Open the disc tray.  
Turn this unit into the standby mode.  
1. Follow the procedure described in “To check program  
data”.  
2. Display the track number to be corrected by pressing the  
SKIP button.  
3. Press a numeric button to select a track to replace the one  
displayed. The previously programmed track will be  
cleared from the memory and the new one will be  
programmed.  
4. After the correction has been completed, once again press  
the PROG button or the PLAY button.  
INDEX SEARCH  
If the disc includes index numbers, play can be started from any desired index number.  
OPEN/  
SYNCHRO  
DIMMER  
TAPE  
TIME  
CLOSE  
SPACE  
1
PEAK  
CLEAR  
PROG  
2
5
8
3
6
9
INDEX  
4
7
+I0  
0
2
1, 3  
REPEAT  
RANDOM  
SEARCH  
SKIP  
STOP  
PAUSE  
PLAY  
To cancel the index search function  
Press the INDEX button.  
1
Select a track which has index numbers.  
Notes  
5
Not all discs have index numbers. The index system is a  
method for sub-dividing tracks into smaller divisions (such  
as, for example, the movements within classical symphonies)  
for easier location of those parts. The liner notes with the  
disc usually tell if such index numbers are included.  
If an index number is selected that is higher than any index  
number on that disc, play will start from the last index  
number point on the disc.  
For some discs, play may begin slightly prior to the actual  
designated index point.  
If the disc has no encoded index points, play will begin from  
the start of the selected track.  
The index number can be designated only while the INDEX  
number display is illuminated.  
2
3
INDEX  
INDEX  
Select the desired index number.  
6
13  
 
TRACK PROGRAMMING FOR RECORDING TO TAPE  
This convenient feature can be used to program tracks on a disc for recording to tape. By only memorizing the tape’s total possible  
recording time, the unit will automatically program tracks or help you to program tracks so they will fit onto the tape with the least  
amount of unrecorded space remaining at each end of the tape.  
Automatic tape-programming  
4
If you desire, you can also enter the tape’s total  
possible recording time manually after you select a  
preset tape length in step 3.  
The unit will automatically program tracks on a disc with the  
original order of tracks unchanged.  
Example: For a C-64 tape (32 minutes on each side)  
4
6
3
+
OPEN/  
SYNCHRO  
DIMMER  
TAPE  
TIME  
CLOSE  
SPACE  
1
PEAK  
CLEAR  
PROG  
2
5
8
3
6
9
2
INDEX  
4
7
+I0  
0
Press the REPEAT button.  
5
4
7
6, 7  
REPEAT  
RANDOM  
REPEAT  
5
1
SEARCH  
SKIP  
STOP  
PAUSE  
PLAY  
The unit automatically programs tracks for side A and side  
B separately considering the tape’s total time.  
* The display shows momentarily the programmed track  
numbers, the total number of programmed tracks and the  
total time of programmed tracks for side A and B  
respectively.  
Stop the unit.  
1
STOP  
6
Begin recording on the tape deck and press the PLAY  
button on this unit at the same time.  
* The peak level searching function of this unit is useful for  
adjusting recording level on the tape deck. (Refer to  
page 17.)  
7
The unit will pause at the end of side A of the tape.  
Turn the tape over to side B. Resume recording and, at the  
same time, press the PLAY or PAUSE button on this unit.  
2
If you desire, you can automatically insert additional  
time space between tracks. (Refer to page 9.)  
Notes  
All tracks may not be programmed if the tape’s length is not  
enough. To program all tracks, use a longer tape.  
CD synchronized recording function can be used if your tape  
deck is compatible with it. If so, in step 6 and 7, press the  
SYNCHRO button and then press the PLAY button on this  
unit’s remote control transmitter. Recording automatically  
begins. (For details, refer to page 18.)  
SPACE  
SPACE  
Display information (at step 5)  
3
Enter the tape’s total possible recording time.  
1
2
TAPE  
PROGRAM  
A
TOTAL  
3
1
Shows the number of programmed tracks for each side in  
turn just after the automatic programming is finished, and  
then it is replaced by the number of the first programmed  
track for side A.  
You can select any of four preset tape lengths by  
pressing the TAPE button.  
2
3
Shows the total time of programmed tracks for each side.  
Shows the side of the tape.  
TAPE  
(off)  
Note on tape programming  
To check, cancel or correct program data, refer to page 13.  
* In checking the program data, note that “Pu” appears  
between track numbers for side A and side B.  
14  
 
Manual tape-programming  
This is for recording desired tracks in any desired  
order onto a tape.  
4
7
OPEN/  
CLOSE  
SYNCHRO  
DIMMER  
TAPE  
TIME  
SPACE  
1
PEAK  
CLEAR  
PROG  
2
5
8
3
6
9
INDEX  
2
4
7
+I0  
0
3, 5  
REPEAT  
RANDOM  
SEARCH  
SKIP  
STOP  
PAUSE  
PLAY  
6, 7  
1
2
Follow steps 1 – 4 on page 14.  
5
Select the track numbers (to be recorded on side B) in  
any desired order.  
1
4
7
2
5
8
3
6
9
+I0  
0
PROG  
PROGRAM  
A
TOTAL  
REMAIN  
6
7
Begin recording on the tape deck and press the PLAY  
button on this unit at the same time.  
3
4
Program desired tracks (to be recorded on side A) in  
any desired order.  
1
4
7
2
5
8
3
6
9
The unit will pause at the end of side A of the tape.  
Turn the tape over to side B. Resume recording and,  
at the same time, press the PLAY or PAUSE button on  
this unit.  
+I0  
0
Notes  
If, in step 3 or 5, “E rr” appears on the display, the track  
number just selected cannot be programmed because there  
is not enough time remaining on the tape.  
In step 3 or 5, each time a selection is made, the track  
number and the tape’s remaining time will be displayed, and  
then the display will change to indicate the next program  
number.  
When track selection for side A is finished, press the  
TAPE button.  
CD synchronized recording function can be used if your tape  
deck is compatible with it. If so, in step 6 and 7, press the  
SYNCHRO button and then press the PLAY button on this  
unit’s remote control transmitter. Recording automatically  
begins. (For details, refer to page 18.)  
TAPE  
A pause mode is programmed.  
Notes on tape programming  
To check, cancel or correct program data, refer to page 13.  
* In checking the program data, note that “Pu” appears  
between track numbers for side A and side B.  
Up to a maximum of 25 tracks can be programmed. If,  
however, the PAUSE mode is inserted, it is counted as one  
track.  
This function can be used to program up to track number 24.  
If the disc has more than 24 tracks, track number 25 and  
thereafter will not be programmed.  
15  
 
Random sequential tape-programming  
The unit will automatically program tracks in random sequential order for recording to tape.  
OPEN/  
SYNCHRO  
DIMMER  
TAPE  
TIME  
CLOSE  
SPACE  
1
PEAK  
CLEAR  
PROG  
2
5
8
3
6
9
INDEX  
4
7
+I0  
0
REPEAT  
RANDOM  
2
SEARCH  
SKIP  
4
STOP  
PAUSE  
PLAY  
3, 4  
Notes  
Because the programmed data changes every time the  
RANDOM button is pressed, the amount of time remaining at  
the end of the tape also changes accordingly.  
If the tape’s length is not enough, all tracks cannot be  
programmed. In this case, exchange the tape for a longer  
one.  
1
2
Follow steps 1 – 4 on page 14.  
RANDOM  
CD synchronized recording function can be used if your tape  
deck is compatible with it. If so, in step 3 and 4, press the  
SYNCHRO button and then press the PLAY button on this  
unit’s remote control transmitter. Recording automatically  
begins. (For details, refer to page 18.)  
The unit will automatically program tracks for side A and  
side B separately considering the tape’s total time.  
* The display shows momentarily the programmed track  
numbers, the total number of programmed tracks and the  
total time of programmed tracks for side A and B  
respectively.  
Display information (at step 2)  
1
2
PROGRAM  
A
3
Begin recording on the tape deck and press the PLAY  
button on this unit at the same time.  
TOTAL  
3
4
The unit will pause at the end of side A of the tape.  
Turn the tape over to side B. Resume recording and, at  
the same time, press the PLAY or PAUSE button on  
this unit.  
1
Shows the number of programmed tracks for each side in  
turn just after the automatic programming is finished, and  
then it is replaced by the number of the first programmed  
track for side A.  
2
3
Shows the total time of programmed tracks for each side.  
Shows the side of the tape.  
Note on tape programming  
To check, cancel or correct program data, refer to page 13.  
* In checking the program data, note that “Pu” appears  
between track numbers for side A and side B.  
16  
 
Automatic searching for the peak level on a disc  
This convenient feature automatically searches a disc for a part where the source level peaks, and next plays the part repeatedly.  
For recording to tape, this feature is very helpful to adjust the recording level on the tape deck.  
OPEN/  
SYNCHRO  
DIMMER  
TAPE  
TIME  
CLOSE  
2
1
SPACE  
1
PEAK  
CLEAR  
PROG  
2
5
8
3
6
9
INDEX  
4
7
+I0  
0
REPEAT  
RANDOM  
SEARCH  
SKIP  
STOP  
PAUSE  
PLAY  
To cancel this function  
Press the STOP button. (Some other buttons can also be used  
to cancel this function.)  
1
2
Stop the unit.  
STOP  
Notes  
Even if the peak level search is performed twice or more on  
the same disc, the same part will not be always selected,  
because this unit will search for the peak level among parts  
on the disc that are randomly selected by the internal  
microcomputer.  
In the program play mode, this feature will function among  
the programmed tracks only. If program play is being  
performed, first press the STOP button, and then press the  
PEAK button. If program play is not being performed, only  
press the PEAK button.  
PEAK  
PEAK  
The peak level search is performed on the disc.  
PEAK  
REPEAT  
PEAK  
REPEAT  
Next, the part where the source level peaks is repeatedly  
played. Adjust the recording level on the tape deck  
listening to this sound.  
17  
 
CD SYNCHRONIZED RECORDING  
This unit can make a tape deck’s recording synchronized with CD play automatically. With this function, you can record a CD on  
tape very easily and more precisely.  
This recording method needs a YAMAHA tape deck compatible with this function. (Refer to the tape deck’s operation manual to  
know whether it is compatible or not.)  
* This unit and the tape deck must be placed close to each other so that both of them can receive the signals from this unit’s remote  
control transmitter at the same time.  
OPEN/  
SYNCHRO  
DIMMER  
TAPE  
TIME  
CLOSE  
1
3
4
SPACE  
1
PEAK  
CLEAR  
PROG  
2
5
8
3
6
9
INDEX  
4
7
+I0  
0
REPEAT  
RANDOM  
SEARCH  
4
5
SKIP  
STOP  
PAUSE  
PLAY  
1
Load the disc.  
4
If necessary, select a desired track.  
OPEN/  
CLOSE  
5
SKIP  
or  
5
2
3
Load a tape on the tape deck.  
PLAY  
*
The peak level search function of this unit is useful  
for adjusting recording level on the tape deck. (Refer  
to page 17.)  
Both CD play and tape deck recording begin.  
* CD play begins a little later than recording.  
SYNCHRO  
6
If you want to stop recording temporarily and restart  
recording from a desired track, follow steps 3–5 again.  
To cancel this function  
Press the STOP button.  
This unit enters into the pause mode, and the tape deck  
enters into the REC/PAUSE mode.  
Notes  
* In this mode, the time display on this unit flashes on and  
off.  
To finish or stop the recording, make proper operations on  
the tape deck.  
Programmed sequence of tracks can also be recorded with  
this function, instead of recording an entire disc. (Refer to  
page 12–13 for the programming procedure.)  
This function can also be used together with the automatic  
tape-programming function. (Refer to page 14–16.)  
18  
 
NOTES ABOUT THE REMOTE CONTROL TRANSMITTER  
Battery installation  
Remote control transmitter operation range  
2
Remote control  
sensor  
1
3
Within approximately  
6m (19.7 feet)  
Battery replacement  
If you find that the remote control transmitter must be used  
closer to the main unit, the batteries are weak. Replace both  
batteries with new ones.  
Notes  
Use only AA, R6, UM-3 batteries for replacement.  
Be sure the polarities are correct. (See the illustration inside  
the battery compartment.)  
Notes  
Remove the batteries if the remote control transmitter will not  
be used for an extended period of time.  
There should be no large obstacles between the remote  
control transmitter and the main unit.  
If batteries leak, dispose of them immediately. Avoid  
If the remote control sensor is directly illuminated by strong  
lighting (especially an inverter type of fluorescent lamp etc.),  
it might cause the remote control transmitter not to work  
correctly. In this case, reposition the main unit to avoid direct  
lighting.  
touching the leaked material or letting it come in contact with  
clothing, etc. Clean the battery compartment thoroughly  
before installing new batteries.  
NOTES ABOUT HANDLING COMPACT DISCS  
This compact disc player is designed only for playing  
Compact discs are not affected by small particles of dust or  
fingerprints on their playing surface, but even so they should  
be kept clean. Wipe by using a clean, dry cloth. Do not wipe  
with a circular motion; wipe straight outward from the center.  
compact discs bearing the  
mark. Never attempt to load  
any other type of disc into the unit.  
The unit will also play 8-cm (3-inch) compact discs.  
To remove a disc from its storage case, open the case and  
then press down at the center; with a finger through the  
center hole and the outer edges held as shown in the  
illustration, lift the disc out carefully.  
Do not try to clean the disc’s surface by using any type of  
disc cleaner, record spray, anti-static spray or liquid, or any  
other chemical-based liquid, because such substances might  
irreparably damage the disc’s surface.  
Always handle the disc with care so that its surface is not  
scratched.  
Do not expose discs to direct sunlight, high temperature or  
high humidity for a long period of time, because these might  
warp or otherwise damage the disc.  
No!  
Compact discs are not subjected to wear during play, but  
damage to the disc surface when the disc is being handled  
can adversely affect the disc’s play.  
To play a 8-cm (3-inch) CD  
Place it in the inner recessed area of the disc tray. Do not put  
a normal (12-cm/5-inch) CD on top of a 8-cm CD.  
19  
 
TROUBLESHOOTING  
If the unit fails to operate normally, check the following points to determine whether the fault can be corrected by the simple  
measures suggested. If it cannot be corrected, or if the fault is not listed in the SYMPTOM column, disconnect the power cord and  
contact your authorized YAMAHA dealer or service center for help.  
SYMPTOM  
PROBABLE CAUSE  
REMEDY  
The player does not switch ON when the  
STANDBY/ON switch is pressed.  
The power cord is not connected or not  
completely connected.  
Securely connect the power cord.  
It happens that this unit does not work  
normally.  
There is an influence of strong external noise  
(lightning, excessive static electricity, etc.) or a  
misoperation on this unit while using this unit.  
Turn this unit into the standby mode and  
disconnect the AC power cord from the AC  
outlet. After about 30 seconds have passed,  
connect the power and operate this unit again.  
The disc tray does not close completely.  
Play does not begin.  
A foreign object is obstructing the tray.  
The disc is damaged.  
Carefully check the disc tray and remove the  
foreign object.  
Check the disc carefully; replace it if  
necessary.  
There is moisture on the laser pickup.  
Wait 20 to 30 minutes after switching the unit  
ON before trying to play a disc.  
The disc has been loaded upside down.  
The disc is dirty.  
Reload the disc with the label side up.  
Clean the disc.  
Play is delayed, or begins at the wrong  
place.  
The disc may be scratched or damaged.  
Check the disc carefully; replace it if  
necessary.  
No sound.  
Improper output cable connections.  
Improper amplifier operation.  
Connect the cables properly. If the problem  
persists, the cables may be defective.  
Set the amplifier controls to the correct input  
selection.  
Sound “skips”.  
Sound “hums”.  
The player is being subjected to vibrations or  
impacts.  
Relocate the player.  
The disc is dirty.  
Clean the disc.  
Improper cable connections.  
Securely connect the audio cables. If the  
problem persists, the cables may be defective.  
Noise from a nearby tuner.  
The tuner is too close to the player.  
The disc may be warped.  
Move the tuner and player farther apart.  
Replace the disc.  
Noise from inside of the disc tray.  
The remote control transmitter does not  
work.  
The batteries of this remote control transmitter  
are too weak.  
Replace the batteries with new ones.  
Direct sunlight or lighting (of an inverter type of Change position of the main unit.  
fluorescent lamp etc.) is striking the remote  
control sensor of the main unit.  
SPECIFICATIONS  
AUDIO SECTION  
GENERAL  
Frequency response ....................... 2 Hz 
מ
 20 kHz, 
ע
0.3 dB  
Harmonic distortion + noise (1 kHz) ....................... 0.0022%  
S/N ratio ........................................................................ 118 dB  
Dynamic range ............................................................... 98 dB  
Wow & flutter ................................................... Unmeasurable  
Output voltage ......................................................... 2.0
ע
0.5V  
Power requirements  
U.S.A. model .................................................. 120V, 60 Hz  
Europe and U.K. models ................................230V, 50 Hz  
General model ..................... 110/120/220/240V, 50/60 Hz  
Power consumption ........................................................ 15W  
Dimensions (W x H x D) ........................ 280 x 82.5 x 354 mm  
(11” x 3-1/4” x 13-15/16”)  
Weight ....................................................... 3.8 kg (8 lbs. 6 oz.)  
Accessories ................................................... Connection cord  
Remote control transmitter  
Batteries (size AA, R6, UM-3)  
Please note that all specifications are subject to change  
without notice.  
20  
 
STORINGZOEKEN  
Controleer de volgende punten, indien het apparaat niet normaal functioneert en bepaal of het probleem verholpen kan worden door  
de eenvoudige hieronder gesuggereerde maatregelen te nemen. Kan het probleem niet worden verholpen, of staat het probleem  
niet vermeld in de STORINGSINDICATIE kolom, het netsnoer van het apparaat uit het stopcontact verwijderen en voor verdere hulp  
contact opnemen met uw dealer of een reparatiedienst.  
STORINGSINDICATIE  
MOGELIJKE OORZAAK  
OPLOSSING  
Sluit het netsnoer goed aan.  
De speler wordt niet ingeschakeld wanneer de  
STANDBY/ON schakelaar wordt ingedrukt.  
Het netsnoer is niet aangesloten of niet volledig  
aangesloten.  
Het doet zich voor dat dit apparaat niet normaal  
functioneert.  
Er is een invloed van een krachtige storing van  
buitenaf (bliksem, buitengewoon veel statische  
elektriciteit, enz.) of een verkeerde bediening van dit  
apparaat.  
Schakel dit apparaat in de standby functie en  
verwijder de stekker van het netsnoer uit het  
stopcontact. Na ongeveer 30 seconden de stekker  
weer in het stopcontact steken, dit apparaat weer  
inschakelen en opnieuw proberen te bedienen.  
De disc-lade sluit niet volledig.  
De weergave begint niet.  
De disc-lade wordt door een vreemd voorwerp  
gehinderd.  
Controleer voorzichtig de disc-lade en verwijder het  
vreemde voorwerp.  
De disc is beschadigd.  
Controleer de disc nauwkeurig; vernieuw deze indien  
nodig.  
Er bevindt zich vocht op de laser pick-up.  
De disc is ondersteboven in de lade geplaatst.  
Wacht 20 tot 30 minuten na het inschakelen van het  
apparaat, alvorens te proberen een disc af te spelen.  
Laad de disc opnieuw met het label naar boven  
gericht.  
De disc is verontreinigd.  
Reinig de disc.  
De weergave begint vertraagd of begint op het  
verkeerde punt.  
De disc is vermoedelijk bekrast of beschadigd.  
Controleer de disc nauwkeurig; vernieuw deze indien  
nodig.  
Geen geluid.  
Verkeerde aansluiting van de uitgangssignaalkabels.  
Verkeerde bediening van de versterker.  
Sluit de kabels op de juiste wijze aan. Indien het  
probleem blijft voortbestaan, zijn de kabels  
vermoedelijk defect.  
Stel de regelaars van de versterker in op de juiste  
ingangssignaalkeuze.  
Het geluid “springt over”.  
Het geluid “bromt”.  
De speler is onderhevig aan trillingen of schokken.  
De disc is verontreinigd.  
Stel de speler op een andere plaats op.  
Reinig de disc.  
Verkeerde aansluiting van de kabels.  
Maak de audiokabels goed vast. Indien het probleem  
blijft voortbestaan, zijn de kabels vermoedelijk defect.  
Storing van een in de buurt opgestelde tuner.  
Storing van binnenuit de disc-lade.  
De tuner bevindt zich te dicht bij de speler.  
De disc is vermoedelijk kromgetrokken.  
Plaats de tuner en de speler verder uit elkaar.  
Vernieuw de disc.  
De zender van de afstandbediening werkt niet.  
De batterijen van deze afstandbediening zijn te zwak.  
Vervang de batterijen door nieuwe.  
Verander de opstelling van de hoofdeenheid.  
Direct zonlicht of verlichting (van een sterke  
fluorescerende lamp, enz.,) valt op de sensor van de  
afstandbediening van de hoofdeenheid.  
SPECIFICATIES  
AUDIO GEDEELTE  
ALGEMEEN  
Spanningsvereisten  
Frekwentiebereik ............................ 2 Hz 
מ
 20 kHz, 
ע
0,3 dB  
Modellen voor U.S.A. ...................................... 120V, 60 Hz  
Modellen voor Europa en Groot-Brittannië  
...........................................................................230V, 50 Hz  
Algemeen model ................... 110/120/220/240V, 50/60 Hz  
Harmonische vervorming + ruis (1 kHz) ............... 0,0022%  
Signaal/ruisverhouding ............................................... 118 dB  
Dynamisch bereik .......................................................... 98 dB  
Wow & flutter ....................................................... Onmeetbaar  
Uitgangsspanning ................................................... 2,0
ע
0,5V  
Stroomverbruik................................................................. 15W  
Afmetingen (L x H x B) .......................... 280 × 82,5 × 354 mm  
Gewicht .......................................................................... 3,8 kg  
Toebehoren ....................................................... Aansluitkabel,  
afstandbediening,  
batterijen (format AA, R6, UM-3)  
Alle specificaties zijn onder voorbehoud en kunnen zondere  
nadere kennisgeving worden gewijzigd.  
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.  
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA  
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY  
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE  
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND  
YAMAHA SCANDINAVIA A.B.  
J
A
WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN  
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA  
VZ21440  
 

Weed Eater Tiller WER500A User Manual
Westinghouse Indoor Furnishings W 224 User Manual
Whirlpool Range 9762358A User Manual
Williams Sound Tablet Accessory CHG3512 User Manual
Woods Equipment Power Roller VR48A User Manual
Yamaha Guitar AEX 500NS User Manual
Zanussi Dishwasher ZT 6910 User Manual
Zanussi Oven ZOB 460 User Manual
Zanussi Refrigerator ZT 57 RM User Manual
Zhone Technologies Network Card 6412 A1 xxx User Manual