XM Satellite Radio Car Satellite Radio System XC9 User Manual

XC9 Car Cradle  
Vehicle Installation  
SATELLITE  
RADIO  
Guide for use with XR9  
Satellite Radio Receiver  
1
0
2
3
4
5
6
7
8
9
128-7218  
1 of 20  
Released: 9-30-04  
 
CONTENTS  
Congratulations ........................................................................................ 4  
Cautions and Warnings ............................................................................ 5  
Contents XC9 ........................................................................................... 6  
Hardware Kit................................................................................. 6  
Installation/Wiring Precautions ................................................................. 7  
Setting Up and Installing Your Kit.............................................................. 7  
Interconnect Diagram ................................................................... 8  
Using Other Manufacturer’s Mounts ........................................... 11  
Installing the XR9 Into the Cradle................................................ 11  
Connection Options ............................................................................... 13  
Mounting the Vehicle Antenna................................................................. 14  
Warranty................................................................................................. 18  
-3-  
128-7218  
3 of 20  
 
Congratulations  
You are one step closer to experiencing XM Satellite Radio. XM will revolutionize your in-home or  
vehicle entertainment with:  
Over 130 channels of original programming, including –  
68 channels of 100% commercial-free music – guaranteed,  
Over 60 channels of world-class sports, news, talk and information.  
Your XR9 Satellite Radio Receiver Audiovox XR9 must be used with an adapter kit, such as the  
Audiovox Home kit, Boom Box or Vehicle Kit as required by your specific installation needs. These  
kits are available at retailers where Audiovox main units are sold.  
Audiovox Home Kit: XH9  
Audiovox Vehicle Kit: XC9  
Audiovox Boombox: XB9  
Accessories:  
RCA Adapter Cable, SAT-RCA  
FM Switching Box, SAT-SWB  
Required subscription for service sold separately. Premium Channels available at additional monthly costs. Instal-  
lation costs and other fees and taxes may apply, including a one-time activation fee. All fees and programming  
subject to change. College sports games subject to availability. Subscriptions subject to Customer Agreement  
included with the XM Welcome Kit and available at xmradio.com. Only available in the 48 contiguous United States.  
(c) 2004 XM Satellite Radio Inc. XM is a trademark of XM Satellite Radio. All rights reserved. All other trademarks  
are the property of their respective owners.  
-4-  
128-7218  
4 of 20  
 
Cautions and Warnings  
1. Do not install the XC9 in a position that hinders  
your view through the windshield, or obstructs view  
ing of the dashboard indicators and displays.  
2. Do not install the unit where it may obstruct the  
operation or deployment of safety devices, such  
as airbags, etc.  
3. Do not allow operation of the unit to detract from  
safe driving practices; remember that you are  
responsible as the vehicle operator to adhere to  
all safe driving and traffic regulations.  
4. This unit complies with the interference limits  
relative to a Class B digital device, applicable  
under Part 15 of the FCC Rules regarding  
installation in a residential environment. If the unit  
is not installed in accordance with these instruc-  
tions, it could cause harmful interference to radio or  
television reception. If this condition persists after  
corrective action, consult your dealer or experi-  
enced installation facility.  
5. By adhering to these warnings and safety consider-  
ations, serious accidents and/or personal injury can  
be avoided.  
-5-  
128-7218  
5 of 20  
 
Contents XC9  
HARDWARE KIT (P/N 150-1579)  
Install Manual  
(P/N 1287218)  
Base  
(P/N 136-3774)  
Screw, Pan Hd, Philips  
M4 x 8mm w/captive  
OPTIONAL  
Flat & Lock Washer  
Audio Cable  
(P/N SAT-RCA)  
4 pc.  
Antenna  
(P/N 118-1133)  
1.6” W X 2”Long  
DoubleSidedFoamTape  
(P/N 138-1305)  
1 pc.  
Cradle XC9  
(P/N 136-3771)  
1 pc.  
1 pc  
1 pc.  
FM Switching Box Assy  
P/N SAT-SWB (6 Meter)  
Alcohol Swab  
(P/N 138-1189)  
12 Volt-to-6 Volt  
DC Power Adapter  
(P/N 112-3456)  
DC IN  
FM OUT  
AUX  
AUDIO  
ANT  
1 pc.  
1 pc.  
1 pc.  
1 pc.  
-6-  
128-7218  
6 of 20  
 
Installation/Wiring Precautions  
Setting Up and Installing Your Kit  
1. To prevent a short-circuit, be sure to turn off the  
ignition and remove the negative (-) battery cable  
prior to installation. Connect power wires last.  
2. Do not install the unit in the locations exposed to  
direct sunlight or, in areas subject to extreme  
temperatures.  
NOTE: The XM signal can be received and processed  
virtually anywhere as long as there are no  
obvious satellite signal obstructions such as  
nearby buildings, high terrain, parking garages  
or tunnels.  
1. Cabling Interconnections  
3. Incorrect installation may cause damage to the  
system. Mount the unit firmly in place, using  
the supplied hardware.  
4. Be careful not to damage the vehicle wiring.  
5. Be sure to use the supplied screws and washers.  
6. Be careful not to snag any wires when tightening  
screws.  
You can begin to enjoy XM™ Satellite Radio as  
soon as the XR9 and Vehicle Kit installation  
are complete. Set up your Audiovox XC9 using  
the following installation instructions, or enlist the  
help of a professional installer:  
7. Use only the 12 Volt-to-6 Volt DC Power Adapter  
supplied. Use of an alternative power adapter may  
damage the XR9 unit and/or the XC9 cradle.  
2. Installing the Cradle Mount Base Assembly  
a. Interconnect all of the components as shown  
on the adjacent page to verify that the system  
operates normally.  
b. Locate a firm, reasonably flat surface within your  
car to permit optimum viewing and line-of-sight  
access by the supplied remote control unit.  
CAUTION: You could drain the vehicle battery if  
the cigarette lighter adapter remains  
plugged in after the ignition is turned  
off. Unplug the adapter to prevent  
this possibility.  
-7-  
128-7218  
7 of 20  
 
Interconnect Diagram  
NOTE:  
XC9 CRADLE  
(REAR VIEW)  
1. IF THE XC9 IS INSTALLED USING  
THE FM SWITCHING BOX, SAT-SWB,  
OPTION, DO NOT CONNECT THE  
AUDIO CABLE TO THE LINE OUT  
CONNECTOR OF THE CRADLE.  
2. THE FM TRANSMITTER OPTION  
MUST BE SET TO ”FM ON” IN THE  
XR9 USER MENU. (REFER TO THE  
OWNER’S MANUAL, PUBLICATION  
NO.128-7220.)  
XM  
ANTENNA  
12V- to-6V  
DC POWER  
ADAPTER  
DC IN  
FM OUT  
AUX  
AUDIO  
ANT  
TO VEHICLE  
+12 VDC POWER  
RECEPTACLE  
OPTIONAL SAT-RCA  
AUDIO CABLE  
(PURCHASED  
SEPARATELY)  
AUX AUDIO INPUT TO AUXILIARY  
AUDIO OUTPUT OF EXTERNAL  
PLAYBACK DEVICE. THIS PERMITS  
AUDIO FROM AN EXTERNAL DEVICE  
TO BE PLAYED THROUGH THE XR9  
WIRELESS FM TRANSMITTER.  
TO VEHICLE  
RADIO ANTENNA  
JACK  
(CONNECT TO  
AUXILIARY AUDIO  
INPUTS ON VEHICLE  
HEAD UNIT.)  
OPTIONAL FM SWITCHING  
BOX SAT-SWB (PURCHASED  
SEPARATELY)  
-8-  
128-7218  
8 of 20  
 
d. If the outside air temperature is cold, it may  
be beneficial to warm the adhesive backing  
on the base using a portable hair dryer, or  
by holding the backing surface in front of a  
vehicle heater vent.  
CAUTION:  
Do not install the mounting base  
on a leather or fabric surface, or  
in a position that could impair  
your vision, block air bag(s) or  
obstruct vehicle dashboard  
controls and/or radio CD/  
e. Remove the plastic liner from the adhesive  
backing on the base, and fix the base in  
position on the surface; make sure the  
mounting pad is accurately positioned on  
the first try, since repositioning may be  
difficult, if not impossible.  
cassetteoperational displays.  
NOTE: The adhesive backing on the base  
will not permit easy repositioning once  
it has been mated to the surface; use  
extreme care and planning when  
selecting the mounting location. If the  
base is to be screwed to the surface,  
make sure the area in back of the  
mounting surface is clear of wires or  
other items to prevent unintentional  
damage.  
f. If the mount is to be screwed in place, do  
not remove the plastic liner from the  
adhesive backing. Use appropriate sheet  
metal or machine screws for this purpose.  
g. To mount the XR9 atop the swivel base, line up  
the slot at the rear of the XC9 cradle with the  
base retainer tab, and slide the cradle down  
so that the slot and tab mesh together in a  
lock position.  
c. Using the alcohol swab supplied with your kit,  
clean the mounting surface and thoroughly wipe  
the area dry with a clean lint-free cloth.  
-9-  
128-7218  
9 of 20  
 
SWIVEL  
ADJUSTMENT  
KNOB  
BASE/CRADLE  
MOUNTING  
PLATE  
NOTE: Allow a 72-hour period for the adhesive  
backing to cure completely.  
3. Installing the Cradle Using Double-Sided Tape  
You can mount the cradle directly to your dashboard  
or other flat surface without using the cradle  
mount in the kit.  
MOUNTING  
BASE  
ASSEMBLY  
SCREW HOLES  
(4) FOR DIRECT  
HARDMOUNTING  
a. Remove the 3/4” x 3” double-sided tape from  
the supplied kit.  
MOUNTING  
PLATE-TO-CRADLE  
RETAINER TAB  
b. Determine the location of the cradle, and clean  
the mounting surface as before.  
c. Peel the backing from one side of the tape, and  
press the tape in place on the rear or bottom  
cradle mounting plate.  
d. Peel the backing from the exposed side of the  
tape and carefully position the cradle on the  
mounting surface, gently pressing the cradle  
into place.  
SWIVEL  
ADJUSTMENT  
KNOB (REF)  
PLASTIC LINER  
AND ADHESIVE  
BACKING  
-10-  
128-7218  
10 of 20  
 
CRADLE  
ASSEMBLY  
(REAR VIEW)  
provideyou with multiple mounting options within  
the vehicle using various vehicle-specific  
aftermarket brackets, such as those purchased  
separately from Panavise, Pro-Fit, etc.  
REAR  
MOUNTING  
PLATE  
NOTE:  
The cradle contains a rear mounting  
plate with four M4 x 7 threaded holes  
for attachment to the vehicle-specific  
after-market bracket. Four M4 x 8 Philips  
screws are supplied with the mounting  
base for this purpose.  
DC IN  
FM OUT  
AUX  
AUDIO  
ANT  
THREADED  
HOLES (4)  
5. Installing the XR9 into the Cradle  
4. Using Other Manufacturer’s Mounts  
Install the XR9 as follows:  
The XC9 Cradle can also be installed using other  
manufacturer’s mounts; the mounting plate  
provisions on the rear of the cradle  
a. Carefully line up the XR9 rear spine grooves  
with the cradle guide spines; slide the latch tab  
lever to the unlock ( ) position, and lower the  
XR9 into the cradle.  
-11-  
128-7218  
11 of 20  
 
LATCH TAB  
LOCK/UNLOCK  
LEVER  
CRADLE  
TOP VIEW  
XR9 REAR  
SPINE  
GROOVES  
XR9 REAR  
VIEW  
16-PIN  
SYSTEM  
CONNECTOR  
CONNECTOR  
GUIDEPIN  
CRADLE  
GUIDESPINES  
CRADLE  
REAR VIEW  
XR9 LATCHING  
TAB RECESS  
CRADLE  
FRONT VIEW  
XR9  
LATCHING  
TAB  
DC IN  
FM OUT  
AUX  
AUDIO  
ANT  
LATCH TAB  
LOCK/UNLOCK  
LEVER  
b. After making sure the connectors are properly  
lined up, gently press down on the XR9 to  
mate the connectors together.  
c. Slide the latch tab lever to the lock ( ) position;  
the tab will enter the XR9 latching tab recess  
to prevent vertical movement. The XR9  
should now be nestled securely in the cradle.  
-12-  
128-7218  
12 of 20  
 
menu, the XM signal received at the ANT cradle  
antenna input can be played through your car  
radio when tuned to one of these fequencies.  
6. Connection Options  
The XR9 and Cradle provide an audio output  
signal in three ways:  
1. FM Wireless Transmitter - When using the XC9  
cradle with the wireless FM transmitter option,  
the XM audio signal can be received at your car  
radio on selectable FM frequencies using the  
menu options included in your XR9. (Refer to  
the XR9 owner’s manual.) The XM audio signal  
can then be played through your car radio when  
the car radio is tuned to one of the available  
frequencies.  
3. Low-Level Audio Output - For vehicles  
equipped with radio head units with auxiliary  
audio inputs, the audio signal can be routed  
through an optional audio cable (Part No. SAT-  
RCA) and applied to the auxiliary inputs of a  
radio or entertainment system. In this case, it is  
best to turn the XR9 FM modulator option off to  
avoid interference.  
XC9 CRADLE  
(REAR VIEW)  
2. FM Direct Wiring - If the FM wireless transmitter  
does not provide satisfactory performance in  
your vehicle, use the optional FM Switching Box  
assembly (Part No. SAT-SWB) which provides  
a hard-wired FM output. Connect the switching  
box to the FM OUT connector on the rear of the  
cradle; the other end of the switching box plugs  
into the antenna jack of your radio. By using  
this assembly, and selecting the appropriate  
FM output frequency (88.1MHz -107.9MHz)  
using the XR9 FM Options-Frequency Control  
TO CAR RADIO  
ANTENNA INPUT  
DC IN  
FM OUT  
AUX  
AUDIO  
ANT  
FM SWITCHING  
BOX SAT-SWB  
-13-  
128-7218  
13 of 20  
 
7. Mounting the Vehicle Antenna  
s
.
s
e
e
k
p
.
tu  
n
e
The antenna should be placed on a relatively flat  
surface on the vehicle exterior, preferably on the  
roof (high point) or on the trunk (convertible). To  
mount the antenna:  
001  
C
hannel  
tist  
Song  
at or  
N
am  
e
A
r
C
e
g
y
12:00P  
A -1  
JU  
M
P
XR9  
(TYPICAL)  
a. Plug the antenna into the ANT connector  
on the back of the cradle.  
b. Place the antenna at the preferred location on  
the roof or trunk surface. If the vehicle is  
equipped with a roof or trunk rack, the antenna  
may have to be mounted off-center on the  
surface. The magnet will secure the antenna in  
the desired position.  
12VDC-TO-6VDC  
ADAPTER  
SAT  
ANTENNA  
(TYPICAL)  
c. Apply power to the XR9 system as outlined  
in the associated User Guide and obtain an  
audio output. If no audio is heard, first check  
the signal strength indicator located on the  
bottom left corner of the display to ensure the  
antenna is receiving an optimum signal. If  
necessary, move the antenna to different  
positions on the surface until an audio output  
is heard. The desired antenna position  
should be marked with masking tape or by  
another non-scratch method.  
d. After determining the optimum position, turn off  
XR9 power, disconnect the power adapter from  
the vehicle cigarette lighter receptacle and  
disconnect the antenna cable.  
-14-  
128-7218  
14 of 20  
 
e. Plan the routing of the antenna cable to the  
cradle. Make sure you avoid any obstructions  
that could crimp, kink or twist the cable; use  
protective grommets wherever rough openings  
are encountered.  
f. Route the cable from the antenna position to  
the interior of the vehicle, working the cable  
under the rear window molding; make  
adjustments and take up slack whenever  
necessary.  
ANTENNA  
g. At the lowest point of the rear window, route the  
cable into the trunk, taking advantage of existing  
cable conduits. Then snake the cable around  
the passenger compartment to the back of the  
XC9 cradle.  
ROUTING  
THE CABLE  
h. In SUV’s, minivans, etc., route the cable into the  
vehicle under the rubber molding of the hatch  
door or tailgate, and then under the interior trim.  
NOTE: Avoid exposing the cable in the driver  
and passenger areas where it could  
become entangled in feet or other  
objects.  
-15-  
128-7218  
15 of 20  
 
i. Plug the antenna cable into the ANT  
connector on the back of the cradle; then plug  
the cigarette lighter adapter into the lighter  
receptacle.  
j. You are now ready to enjoy XM programming  
within your vehicle.  
-16-  
128-7218  
16 of 20  
 
THIS PAGE LEFT BLANK INTENTIONALLY  
-17-  
128-7218  
17 of 20  
 
12 MONTH LIMITED WARRANTY  
AUDIOVOX CORPORATION (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof,  
undernormaluseandconditions, beprovendefectiveinmaterialorworkmanshipwithin12monthsfromthedateoforiginalpurchase, suchdefect(s)  
will be repaired or replaced with new or reconditioned product (at the Company's option) without charge for parts and repair labor.  
To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof of warranty coverage (e.g. dated bill  
of sale), specification of defect(s), transportation prepaid, to an approved warranty station or the Company at the address shown below.  
This Warranty does not extend to the elimination of externally generated static or noise, to correction of antenna problems, to costs incurred for  
installation, removal or reinstallation of the product, or to damage to tapes, compact discs, speakers, accessories, or vehicle electrical systems.  
This Warranty does not apply to any product or part thereof which, in the opinion of the Company, has suffered or been damaged through alteration,  
improper installation, mishandling, misuse, neglect, accident, or by removal or defacement of the factory serial number/bar code label(s). THE  
EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE  
AND, IN NO EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.  
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF  
MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY  
WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD OF  
48 MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR  
INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. No person or  
representative is authorized to assume for the Company any liability other than expressed herein in connection with the sale of this product.  
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage  
so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights and you may also have other rights  
which vary from state to state.  
U.S.A. : AUDIOVOX CORPORATION, 150 MARCUS BLVD., HAUPPAUGE, NEW YORK 11788 z 1-800-645-4994  
CANADA : CALL 1-800-645-4994 FOR LOCATION OF WARRANTY STATION SERVING YOUR AREA  
128-6464  
-18-  
128-7218  
18 of 20  
 
THIS PAGE LEFT BLANK INTENTIONALLY  
-19-  
128-7218  
19 of 20  
 
© 2004 Audiovox Electronics Corporation, 150 Marcus Blvd., Hauppauge, New York 11788  
128-7218  
-20-  
128-7218  
20 of 20  
 

Westinghouse Intercom System WHDBI 5C User Manual
Whirlpool Washer CAM2752TQ User Manual
Whirlpool Washer DESIGN 2000 User Manual
Wolf Ventilation Hood PL582212 User Manual
Woods Equipment Lawn Mower MX54T User Manual
Xerox Copier 604P18037 User Manual
Zanussi Ice Maker 730523 User Manual
Zanussi Refrigerator SAL25N04 User Manual
Zanussi Washer Dryer ZWD 1480 W User Manual
Zhone Technologies Network Card Raptor XP 15x User Manual